Hitch Mounted Accessories

 

DrawTite Hitch Accessories
Hitch Accessories
Hitch accessories are products that mount to the hitch or secure the products in the hitch. Items that are included in this category are pin, clips, locks, anti-rattle devices, tube covers, and front mounted accessories.

Pin & Clip
A pin and clip is used to secure the ball mount to the hitch. The pin comes in two sizes. A ½” pin is used for Class I & II hitches, while the 5/8″ pin is used for Class III and larger.

Locks
A lock can be used instead of a pin & clip. There is a variety of locks available to choose from. These also come in two sizes similar to pin and clips (1/2″ & 5/8″).

Tube Covers
Draw-Tite recommends that you use a tube cover when not towing to keep debres from getting in to the hitch opening. There is a variety of tube cover to choose from. These tube covers are also offered for Class I through Class V hitches.

Front Mounted Receiver (FMR) Accessories
We offer a variety of accessories for your front mounted receiver. These accessories can also be used in your rear mounted hitch too.

 
 
 
 
 
 
 
 
 
DrawTite Clevis Mount Pin
DrawTite 
DrawTite Receiver Tube Cover
 
 
 
 
 
 
 
 
Hitch Tire Carrier
 The spare tire carrier is ideal for relocating spare tires to the front of the  vehicle using a front mounted receiver. It has a universal bolt pattern for mounting a variety of tire sizes. 
     Description
     Front Mount Receiver Accessory, Spare Tire Carrier

License Plate Holder
DrawTite License Plate Holder Some states and provinces require a front license plate. The license plate adapter offers a simple solution where the front hitch interferes with the plate 
 Description
 Fold Down License Plate Holder
 Front Mounted Receiver Accessory, License Plate Holder

Skid Shield
DrawTite Skid Shield Off road enthusiasts know what this one is for. It is recommended for use with hitches that are mounted below the bumper. 
Description
Front Mount Receiver Accessory, Receiver Tube Skid Shield

Winch Mounting Plate
DrawTite Winch Mounting Plate Front mounted receivers are rated for 9,000 lbs. line pull. This makes them ideal for use with winches. They accept most models of Superwinch, Ramsey and Warn. Will not fit with S-4500 superwinch. 
Description
Front Mount Receiver Accessory, Winch Mounting Plate
Front Mount Receiver Accessory, Handle Kit for #6495 Winch Mounting Plate
Replacement Handle Grip

Work Step
DrawTite Work Step The work step is useful for gaining access to engine compartment, particularly with 4 x 4 pick-ups. Can also be used on rear Class III/IV hitches. 
 Description
 Front Mount Receiver Accessory, Work Step

 

 
DrawTite Hitch Tire Carrier

Tow Ready - ATV Cargo Carrier    ATV Cargo Carrier

Part Number: 65852    (Now Available)

 Description: Cargo Carrier for 2″ Sq. Receivers, 20″ x 36″ Platform

Finish: Black Powder Coat

Warranty: Limited 1 Year

Weight: 35 lbs.

Package Type: Box w/Label

 

Tow Ready - Cargo Carrier - Adjustable Cargo Carrier

   Description: Cargo Carrier for 1-1/4″ and 2″  Sq. Receivers,  20″ x 48″ Platform

  • Adjustable fore & aft for best fit
  • Mesh floor for easy cleanup
  • Standard 3″ side rails to retain cargo
  • Attachment holes for load securing devices
  • Angled design for maximum ground clearance
  • Corner markers included for visibility (not pictured)
  • Black powder coat finish resists corrosion



 

B&W Tow and Stow Ball Mounts

 

Click Here for Features Image

 

  • 10,000 lb GVWR / 1,000 lb MTW
  • Eliminate the need for multiple ball mounts
  • Stows under the vehicle when not in use
  • Keeps the hitch out of the way of shins and garage doors
  • Manufactured from steel for a lifetime of reliable towing
  • Fits any standard 2 inch receiver hitch
  • Rotate the ball to the desired size
  • Raise or lower the hitch in one inch increments for a safe level tow
  • Tri-ball mount is 1 7/8″ x 2″ x 2 5/16″
  • Dual Ball is available in 2 5/16″ x 2″ or 1 7/8″ x 2″
  • Four High Quality Accessories Available
  • Powder coated for a durable and long lasting finish
  • Tow & Stow with Browning Logo is also available

 

 

 

 

Ball Mounts
The ball mount is designed to be inserted into the hitch. There are different styles of ball mounts, so please refer to “Selecting the correct ball mount” chart for your specific ball mount. Ball Mounts come in different lengths and are used in drop and rise positions, use the chart to help determine which ball mount fits your needs. When selecting a ball mount make sure to look at the weight rating, it should be equal to or larger than the hitch being used.

For safe and comfortable towing the trailer should always be set up to tow on a level plane. Sometimes a trailer’s tongue is higher or lower than the ball mount on the vehicle. In this situation a ball mount with a “Rise” or a “Drop” is required to level the trailer.

Incorrect Hook-up     Correct Hook-up

Class I & II ball mounts are also referred to as drawbars. The drawbar typically comes with the hitch because the hitch is designed with a specific drawbar in mind for each vehicle. Refer to your hitch installation instructions for any replacement drawbar.

Class III through V hitches are designed with many different ball mounts in mind because of the variety of SUV and truck suspensions and tire combinations.

Note: The shank hole size of ball mount must match the size of the hitch ball shank size.

Selecting the correct Ball Mount
Step 1:
Measure from the ground to the top of the hitch.
Step 1: Measure
Step 2:
Level trailer, then measure from the ground to the top of the trailer coupler.
Step 1: Level
Step 3:
Subtract the height of the hitch ball (most are 2-1/2″ to 3″ high) from Step 2. The example would be 18″ minus 3″ = 15″.

Step 4:
The difference between Step 1 and Step 3 would be the “Drop” or “Rise” that is needed for your Towing System. The example would be a result of 8″ (23″ minus 15″) Drop is required.

 

Class I: 1-1/4″ Drawbar Kit
  • 1-1/4″ square design
  • Includes Pin and Clip
  • Rated up to 2,000 lbs. Weight Carrying (WC) / 200 lbs. Tongue Weight (TW)
  • Black powder coat finish
Note: These drawbars are considered replacement items. All Class I hitches include a drawbar, pin and clip.
DrawTite Class I: 1-1/4

Drawbar Kit
 Part No.(A)
Length
(B)
Rise
(C)
Drop
HoleTW / WCFinish
 35906-5/85/83/4200/2000Black Powder Coat
 35919-3/45/83/4200/2000Black Powder Coat
 35929-3/42-3/42-3/43/4200/2000Black Powder Coat
 35936-5/82-3/42-3/43/4200/2000Black Powder Coat
 35941043/4200/2000

Black Powder Coat

 
Class III and IV: Ball Mount
  • Designed for Class III and IV hitches
  • 2″ square design
  • Black powder coat finish
DrawTite Class III and IV: Ball Mount

Quick-Loading Ball Mount
DrawTite Quick-Loading Ball Mount
  • Angle cut design allows for easy insert into hitch
 
 Part No.(A)
Length
(B)
Rise
(C)
Drop
HoleTW / WCFinish
 403428-1/23/421600/6000Black Powder Coat
 4034310-1/23/421600/6000Black Powder Coat
 4034492-3/441600/6000Black Powder Coat
 40345112-3/441600/6000Black Powder Coat
 403469-1/24-3/461600/6000Black Powder Coat

Utility Ball Mount
DrawTite Utility Ball Mount  
 Part No.(A)
Length
(B)
Rise
(C)
Drop
HoleTW / WCFinish
 270699-3/4111350/3500Black Powder Coat
 2736123/421500/5000Black Powder Coat
 2793106-3/481500/5000Black Powder Coat
 
Class IV: Ball Mount
  • Designed for Class IV hitches
  • 2″ square design
DrawTite Class IV: Ball Mount

Aluminum Ball Mount
DrawTite Aluminum Ball Mount
  • Solid One-Piece Forged Construction
  • Aluminum Finish
  • 1″ Thick x 3″ Wide Ball Platforms
  • Angled Quick Load Design
  • Designed to Handle Heavy Duty Loads up to 800 lbs. (TW) & 8,000 lbs. (GTW)
 
 Part No.(A)
Length
(B)
Rise
(C)
Drop
HoleTW / WCFinish
 403819-7/8121800/8000Aluminum
 4038210-5/8341800/8000Aluminum
 4038311-7/8561800/8000Aluminum
 4038410-7/8781600/6000Aluminum

Forged Ball Mount
DrawTite Forged Ball Mount
  • Solid One-Piece Forged Construction
  • Double Powdercoat Finish
  • 1″ Thick x 3″ Wide Ball Platforms
  • Angled Quick Load Design
  • Designed to Handle Heavy Duty Loads up to 1,200 lbs. (TW) & 12,000 lbs. (GTW)
 
 Part No.(A)
Length
(B)
Rise
(C)
Drop
HoleTW / WCFinish
 403308-1/2121-1/41600/16,000Black Powder Coat
 403319-1/4341-1/41600/16,000Black Powder Coat
 4033210-1/4561-1/41600/16,000Black Powder Coat

Hollow Shank Ball Mount
DrawTite Hollow Shank Ball Mount
  • 1″ Thick x 3″ Wide Ball Platforms
  • Designed to Handle Heavy Duty Loads up to 1,000 lbs. (TW) & 10,000 lbs. (GTW)
  • 2″ Square Hollow Shanks
  • 1-1/4″ Ball Hole
  • Black Finish
 
 Part No.(A)
Length
(B)
Rise
(C)
Drop
HoleTW / WCFinish
 402008-1/23/421-1/41000/10,000Black Powder Coat
 4020192-3/441-1/41000/10,000Black Powder Coat
 4020211-1/42-3/441-1/41000/10,000Black Powder Coat
 40205961-1/41000/10,000Black Powder Coat
 40206981-1/41000/10,000Black Powder Coat

Solid Shank Ball Mount
DrawTite Solid Shank Ball Mount
  • 1″ Thick x 3″ Wide Ball Platforms
  • Designed to Handle Heavy-Duty Loads up to 1,200 lbs. (TW) & 12,000 lbs. (GTW)
  • 2″ Square Solid Shanks
  • 1-1/4″ Ball Hole
  • Zinc Finish
 
 Part No.(A)
Length
(B)
Rise
(C)
Drop
HoleTW / WCFinish
 42808-1/2121-1/41200/12,000Zinc
 42818-1/2341-1/41200/12,000Zinc
 42829-1/2561-1/41200/12,000Zinc
 42839-1/2781-1/41200/12,000Zinc
 428412121-1/41200/12,000Zinc
 428512341-1/41200/12,000Zinc
 
Class V: Ball Mount
  • 2-1/2″ square design for use with Titan Hitches
  • Ideal for marine, agricultural and recreational use
  • Black powder coat finish
DrawTite Class V: Ball Mount

Titan® Ball Mount
DrawTite Titan® Ball Mount  
 Part No.(A)
Length
(B)
Rise
(C)
Drop
HoleTW / WCFinish
 451229-1/41-1/231-1/41400/14,000Black Powder Coat
 45123103-1/251-1/41300/13,000Black Powder Coat
 4529110-1/27-3/41-1/41300/13,000Black Powder Coat
 45322101-1/231-1/42000/18,000Black Powder Coat
 45323103-1/251-1/42000/18,000Black Powder Coat
 
Pintle Mounts
 
DrawTite Pintle MountDrawTite Pintle Combination
 
 
Hitch Balls
The hitch ball mounts to the ball mount or the weight distributing head. Hitch balls come in different sizes and styles so refer to “Selecting the correct hitch ball” chart for your specific need. Keep in mind the hitch ball weight rating should always be equal to or larger than the hitch and ball mount being used.

Size Differences

  • 1-7/8″ balls have ratings up to 2000 lbs with a ¾” shank size
  • 1-7/8″ balls have ratings up to 2000 lbs with a 1″ shank size
  • 2″ hitch ball has ratings up to 3500 lbs. with a ¾” shank size
  • 2″ hitch ball has ratings up to 6000 lbs. with a 1″ shank size
  • 2″ hitch ball has ratings up to 8000 lbs. with a 1-1/4″ shank size
  • 2-5/16″ hitch ball has ratings up to 6000 with a 1″ shank size
  • 2-5/16″ hitch ball has ratings up to 14,000 with a 1-1/4″ shank size

     

  •  

     

     

     


    Policies | Privacy | Terms & Conditions | Disclaimer | Site Map